Perimeter/Exterior/Approach Lighting

[dcpac1]

I have seen others that have Perimeter/Exterior/Approach Lighting on the sides of their vehicle. Mine does not, and I cannot find the setting or “button”that might activate it. I have tried all the pages on the settings portion. Any ideas?

 

[Dan G]

I have seen others that have Perimeter/Exterior/Approach Lighting on the sides of their vehicle. Mine does not, and I cannot find the setting or “button”that might activate it. I have tried all the pages on the settings portion. Any ideas?

The lights are there but they don’t turn on? I don’t know the RHO had that

 

[jb37]

cant speak to the RHO or newer systems .... still waiting delivery - but in the Rebel

 

[duetz]

Let me know if you find an answer

 

[Joe86]

I have seen others that have Perimeter/Exterior/Approach Lighting on the sides of their vehicle. Mine does not, and I cannot find the setting or “button”that might activate it. I have tried all the pages on the settings portion. Any ideas?

Your truck is lvl 1 or 0?

 

[dcpac1]

Your truck is lvl 1 or 0?

Level 1

 

[dcpac1]

cant speak to the RHO or newer systems .... still waiting delivery - but in the Rebel View attachment 1913View attachment 1914

Can’t seem to find that.

 

[CamNak11]

I wonder if that is only an option on the tow mirrors maybe?

 

[RamFan]

I wonder if that is only an option on the tow mirrors maybe?

Could be. I know not a lot ordered theirs with tow mirrors but we did as we have a boat. I’ll let you know once we pick ours up if no one else does before.

Chris

 

[mike12193]

I have the tow mirrors and the approach lighting with “RAM” projected on the ground. Very cool.

 

[Banger]

There are two lights below the mirrors on Level 1 (not sure about L0).
One spells out “RAM” on the ground a couple of feet away from the truck (in case you forgot who made your truck), the other is the puddle lamp that illuminates the area on the ground right where you go to step into the truck. I have standard mirrors, not tow mirrors

 

[Dan G]

There are two lights below the mirrors on Level 1 (not sure about L0).
One spells out “RAM” on the ground a couple of feet away from the truck (in case you forgot who made your truck), the other is the puddle lamp that illuminates the area on the ground right where you go to step into the truck. I have standard mirrors, not tow mirrors

That is fantastic news! For a second I almost started regretting not getting the tow mirrors.

 

[Banger]

Never knew they were called puddle lamps, but it makes sense and they are handy for sure. Keeps you from unknowingly stepping in a puddle on your way in, and also lets you know if it’s icy or slick in cold weather.

 

[gram10]

There's a setting under lighting or door locks where you can change the setting. It may be off, i have level 1 no tow mirros and it works

 

[RamFan]

I have the tow mirrors and the approach lighting with “RAM” projected on the ground. Very cool.

Nice!! Looking forward to all the functions being controlled from inside. It can be a minor inconvenience adjusting them from standard to tow settings

 

[Banger]

Not sure if L0 has these or not.
If they’re not on L0, then that may answer the OP’s question.

 

[dcpac1]

There's a setting under lighting or door locks where you can change the setting. It may be off, i have level 1 no tow mirros and it works

Been through it a couple times. Can you post a pic of the setting?

 

[mike12193]

Not the best shot but here is what it looks like.

 

[dcpac1]

Not the best shot but here is what it looks like.

Thank you! Do you have a pic of the settings page?

I have gone through every page and cannot find anything that speaks to puddle lamps or similar.

 

[kaos_859]

Here's a pic of my courtesy lamps and Vehicle > Settings > Lights page. I've not found a enable/disable option for the lamps. Make sure your interior lamps aren't disabled (overhead console button) and that you have 'Proximity Wake-Up' and 'Headlight Illumination on Approach' active.