- Joined
- Dec 22, 2024
- Messages
- 1
- Reaction score
- 0
- Current Ride
- 2025 Ram RHO
So I purchased “AMP Research PowerStep Plug-N-Play | Fits 2019 - 2024 RAM 1500 | 76240-01A”.
I installed it today, but ran into on major snafu.
The instructions say to plug the 2-pin into the green block at this location. That’s the problem. I don’t think our trucks have this green block.
Any one know where to get signal that the doors have been opened?
I went ahead and put the fuse in and thankfully they retracted from the install/down position to the up position, so they are out of the way. But, they obviously don’t move when the doors open since they aren’t connected to the 2-pin sensor.
This photo is from a similar position in my truck. The green blocks are missing.
I installed it today, but ran into on major snafu.
The instructions say to plug the 2-pin into the green block at this location. That’s the problem. I don’t think our trucks have this green block.
Any one know where to get signal that the doors have been opened?
I went ahead and put the fuse in and thankfully they retracted from the install/down position to the up position, so they are out of the way. But, they obviously don’t move when the doors open since they aren’t connected to the 2-pin sensor.
This photo is from an install video I found for a TRX.
This photo is from a similar position in my truck. The green blocks are missing.
