37 Tire Package

[frogjbm]

Cool, I haven't decided yet so I'll follow what you're doing. Post pics in about 8 months when we get our trucks.

Copy that

 

[DCook]

No rubbing on Aero mode and higher. Exit level, yes absolutely . Mine has a 6” lift kit, but from I’ve researched, technically 37’s and 20” rims will fit on the RHO stock, as they do TRX, but I’m doing a 1.5” level kit on the front immediately anyway so it will be a non issue.

Not with that offset your 1.5 is going to be a must . I like it definitely!

 

[frogjbm]

Not with that offset your 1.5 is going to be a must . I like it definitely!

That’s interesting, because it’s an 18 offset, my neighbor has a 23 TRX same exact wheels / tires and stock front end, no rub. Now if he’s off-roading and using his suspension, it would rub, but he’s not off-roading his TRX. Either way, I want to be safe AND I prefer the level look anyway, so it will be done immediately. Btw thank you!

 

[DCook]

That’s interesting, because it’s an 18 offset, my neighbor has a 23 TRX same exact wheels / tires and stock front end, no rub. Now if he’s off-roading and using his suspension, it would rub, but he’s not off-roading his TRX. Either way, I want to be safe AND I prefer the level look anyway, so it will be done immediately. Btw thank you!

I apologize I thought those were way more than 18 ... 18 is kinda the max right I was looking this up last month because I have a few sets of wheels that are a bit more negative

 

[frogjbm]

I apologize I thought those were way more than 18 ... 18 is kinda the max right I was looking this up last month because I have a few sets of wheels that are a bit more negative

Oh no apology needed my friend, it was a good call out making me rethink my decision, lol. Appreciate that! I think these will look sick, always interested to see what peeps do to enhance these badass trucks! Have a good one brother.

 

[Unstroked]

What was the tire set up for the Mopar truck that was at SEMA? I want to know if it had a lift kit to make the 37,s fit

 

[TheRealCatfish]

What was the tire set up for the Mopar truck that was at SEMA? I want to know if it had a lift kit to make the 37,s fit

I don't know this for certain, but it doesn't seem they did anything for wheel and tire clearance on the Mopar build. I have been keeping an eye on leveling/lift kit options but haven't seen anything specific for TRX or RHO coming from Mopar. It is possible that I could have overlooked it, and I know they have some for the other 1500's and Jeeps.

Looking at the side view of the truck, it still seemed to have the factory rake, which leaves me under the impression that they just put 37" BF Goodrich KM3 tires on the factory18x9 beadlock wheels. I am aware that you can change the beadlock ring to black (which a buddy of mine did on his TRX). Quick google search.. I believe the part# for this is 68600345AA

Also, many TRX owners ran 37's on stock wheels or stock wheel offset. The KM3's run small and aren't a true 37 and more like a 36 1/2, so I imagine that you could get away with running this on the street with minimal to no rubbing. I'm sure someone in some TRX forum has probably done it to know for certain.

 

[matt35hr]

I don't know this for certain, but it doesn't seem they did anything for wheel and tire clearance on the Mopar build. I have been keeping an eye on leveling/lift kit options but haven't seen anything specific for TRX or RHO coming from Mopar. It is possible that I could have overlooked it, and I know they have some for the other 1500's and Jeeps.

View attachment 1295
Looking at the side view of the truck, it still seemed to have the factory rake, which leaves me under the impression that they just put 37" BF Goodrich KM3 tires on the factory18x9 beadlock wheels. I am aware that you can change the beadlock ring to black (which a buddy of mine did on his TRX). Quick google search.. I believe the part# for this is 68600345AA

Also, many TRX owners ran 37's on stock wheels or stock wheel offset. The KM3's run small and aren't a true 37 and more like a 36 1/2, so I imagine that you could get away with running this on the street with minimal to no rubbing. I'm sure someone in some TRX forum has probably done it to know for certain.

They very may well fit with no modification...
My only concern would be with all that additional unsprung weight, and no upgrades to the shocks your handling, performance and braking will all be negatively affected
One only needs look at the difference between the regular raptor and the 37 package raptor shocks 37 package has dual valves on fox shocks
Regular raptor single valve only
Jmo