What did you do to your RHO Today?

[MurphNH]

Does that carpeted bed get nasty/moldy over time? Seems like it would . . .

I had one in my GMC for 5 years and water that got past the cover would stay under the bedrug for longer than if I did not have it but never turned into mold or anything nasty. I loved it and was one of the first things I ordered for this truck.

 

[Eric]

Does that carpeted bed get nasty/moldy over time? Seems like it would . . .

It stays pretty dry and is made of polypropylene so it shouldn’t.

 

[Sotarho]

Sorry, It does not.

Does your Bakflip allow for a rack, eg Yakima, etc?

 

[sheepoppa]

Does your Bakflip allow for a rack, eg Yakima, etc?

no sir, no t slot rails

 

[ASiskos]

Paint Corrected
PPF front, and rear door sills
Stealth PPF lower side - all the black shinny stuff (mirrors too)
Tinted all around
Running Boards and BAK flip installed
Now sunbathing and letting it all cure.
Might have to redo mirrors and the sills…that PPF is good but the more curves the more exact you need to be on the cut and application.

 

[ASiskos]

Meant to ask…can’t get that red dot off the tires!! Any luck with a product/process?

Also, some of the scuffs on the plastic fenders and the door plastic are already starting to drive me nuts. Best product to use for long term care?

 

[MurphNH]

Meant to ask…can’t get that red dot off the tires!! Any luck with a product/process?

Also, some of the scuffs on the plastic fenders and the door plastic are already starting to drive me nuts. Best product to use for long term care?

Power washer took off the red dots but there are hand written numbers on mine that are being very stubborn.

I find a few applications of something like chemical bros ceramic plastic and vinyl trim spray makes them almost disappear

 

[RHOfan]

Paint Corrected
PPF front, and rear door sills
Stealth PPF lower side - all the black shinny stuff (mirrors too)
Tinted all around
Running Boards and BAK flip installed
Now sunbathing and letting it all cure.
Might have to redo mirrors and the sills…that PPF is good but the more curves the more exact you need to be on the cut and application.

Can you post some close-up shots of the Stealth lower PPF?

Nice truck!

 

[RADA]

Yelled at my spawn for slamming doors, leaving food wrappers, dirty clothes, and makeup all over the back seat and floor.

I cannot wait until they are old enough to drive...

I'm soooo going to get a bag of crushed Oreos, and will eat them in their cars while spilling chocolate milk. Then I'm trimming my toenails, while I touch every window and shiny surface...

*breathing.....


Okay, I'm better now.

 

[bdodson32]

Installed Bakflip X4S tonneau cover and Go Rhino RB20 slim bedliner side rails

Hey Barnyard, I am thinking of going with the RB20 slim as well. Any chance you could provide some pics? Thanks.

 

[mike12193]

Does that carpeted bed get nasty/moldy over time? Seems like it would . . .

I have had a carpeted bed rug in my 3500 Work truck for 3 years and it sees some pretty nasty stuff. When it gets dirty I take it out and hose it off. And then put it back. I am surprised of how durable it is. I also have a bed cover and was concerned about mold. There has been none so far. When I do use my bed I don’t leave material/feed/supplies in it for very long.

 

[HudsoTodd]

Hi guys, my RHO is finally almost here! Looking a bed cover options… Thoughts on the rough country bed cover?

 

[MTG]

Hi guys, my RHO is finally almost here! Looking a bed cover options… Thoughts on the rough country bed cover?

I just received mine from Nick from 797 performance. He’s awesome to work with, gave me a fantastic deal, and shipped quick. Highly recommend! @Nick797

 

[HudsoTodd]

I just received mine from Nick from 797 performance. He’s awesome to work with, gave me a fantastic deal, and shipped quick. Highly recommend! @Nick797

Oh sweet! What did you pay for yours?

 

[ASiskos]

Can you post some close-up shots of the Stealth lower PPF?

Nice truck!

Here’s during install that shows the difference
You can also see one of the scuffs on the rear
Fender. Any ideas on how to treat the fenders?

 

[Scuba-Doo]

Hi guys, my RHO is finally almost here! Looking a bed cover options… Thoughts on the rough country bed cover?

Are you looking at the RC flip, manual retractable or electric retractable one? I got the electric only because it has the T slot track for a rack. MSRP on the elec is $1700

 

[truckguy]

Are you looking at the RC flip, manual retractable or electric retractable one? I got the electric only because it has the T slot track for a rack. MSRP on the elec is $1700

I’m looking at the rough country electric retractable. How you like it? Any issues? How is the build quality?

 

[Scuba-Doo]

I’m looking at the rough country electric retractable. How you like it? Any issues? How is the build quality?

It’s nice. Price is good. I have a Roll-n-lock electric on my 3500 and this one seems just as nice at almost 1/2 the cost. Just stuck a cheap Amazon rack on as I use this truck for work.

 

[RHOfan]

Meant to ask…can’t get that red dot off the tires!! Any luck with a product/process?

Also, some of the scuffs on the plastic fenders and the door plastic are already starting to drive me nuts. Best product to use for long term care?

My plastic fender extensions looked scuffed from the factory. Turns out the protective tape was on it a bit too long & the adhesive transferred.

As I recall, I used WD-40 (really soaked them), followed by alcohol & water mixture to remove the WD-40 slickness. Then, cleaned them with Adam’s CS-3 waterless wash with ceramic. I’ve since maintained them with the CS-3 wiped off with mf towels. They look stellar after 2K miles.

 

[MTG]

Oh sweet! What did you pay for yours?

$595 shipped, pretty solid deal saving me $100 over amazon. And I’d much rather support a smaller business and vendor on the forum. Win for all.